ຕົວຢ່າງຂອງບັນຫາທົ່ວໄປຂອງເຄື່ອງຈັກສັກຢາ

ຜ່ານຄວາມເຂົ້າໃຈແລະຄວາມເຂົ້າໃຈເລິກເຊິ່ງຂອງພວກເຮົາໃນເມື່ອກ່ອນເຄື່ອງຍິງປືນ, there will still be some novices who do not fully understand the ເຄື່ອງຍິງປືນ. At the same time, it is also popularized based on what we have not mentioned before. The following are some examples of our problems and polishing The technical requirements for shot blasting of the ເຄື່ອງຍິງປືນ, etc., I hope you will learn something and strengthen your own practical deficiencies.
1. ຊອກຫາຢູ່ໃນເຄື່ອງຍິງປືນຈາກທັດສະນະວິຊາຊີບ, ມັນແມ່ນເຄື່ອງຈັກປະເພດໃດ? ວິທີການເລືອກໂຮງງານຜະລິດແລະປຸງແຕ່ງໂຮງງານ?

The ເຄື່ອງຍິງປືນ itself is a surface treatment equipment, dedicated to solve the problem of imperfect surface of metal objects, and can remove the rust layer, rust spots, oxidation, painting, renovation, etc. on the surface of metal objects. For the foundry industry, performance, stability and quality should be considered when choosing a ເຄື່ອງຍິງປືນ. Secondly, considering the price, because there are more ເຄື່ອງຍິງປືນs in the market, you can choose to shop around. Only then can there be price comparisons.

2. ຂໍ້ ກຳ ນົດດ້ານເຕັກນິກ ສຳ ລັບການສັກຢາກັນໂຣກແມ່ນຫຍັງ? ມີລັກສະນະຫຼັກຄືແນວໃດ?

ຈຸດ ໜຶ່ງ ແມ່ນບັນຫາຂອງເຄື່ອງຍິງປືນ itself. On the basis of shot blasting technology, the ເຄື່ອງຍິງປືນ must be stable enough, and what kind of ເຄື່ອງຍິງປືນ is used for example: steel shot, iron shot, aluminum shot , And what is the size of the pellets, and then what is the ejection speed when we shot blasting. The professional name is called ejection flow. Different shot blasting intensities have different throwing effects, and the efficiency will be corresponding. Get the same change.

3. What should I do if the ເຄື່ອງຍິງປືນ misses the shot? How to solve it?
ຖ້າວ່າເຄື່ອງຍິງປືນ is in use, it is likely to be caused by the shape of the workpiece, but this is not an absolute factor. Usually, there will be more probability at the exit of the ເຄື່ອງຍິງປືນ. According to this point, we will cause Pay attention, and deal with the missing blasting material at any time during the working time, so as not to form a pile, so as not to affect the normal shot blasting progress.
The above three points are reference for common problems of ເຄື່ອງຍິງປືນs, which are very useful for production and processing manufacturers. According to strict production, the shot blasting effect will not be bad, so we must also think from a comprehensive perspective in order to achieve ourselves The expected effect.